|
Environmental Towers LEADING
MANUFACTURER OF ENVIRONMENTAL ALUMINUM TOWERS
Lightweight aluminum towers ideal for environmentalists
to quickly elevate air monitoring and sampling
equipment. Pipeline and utility companies transfer
data with their SCADA systems utilizing Aluma’s
towers.
10M FOLD-OVER
ALUMINUM TOWER:
FOT-10M 10-meter aluminum tower designed for
small, lightweight antennas or equipment. Specifically
designed to elevate air-sampling equipment.
The tilt-over tower allows for rapid collection
of samples. Tower consists of two “B”
sections: lower section 17 ft. and upper section
25 ft. The upper section is hinged at top of
the lower section to fold-over. Tower is complete
with a 2” dia. x 1/8” wall x 4’-9”
long mast and fixed base. Lower section must
be guyed or building bracketed at a minimum
of six feet.
FOT-10M-BW 10-meter aluminum tower consists of
two “B” sections: lower section 17
ft. and upper section 25 ft. The upper section
is hinged at the top of the lower section to fold-over.
Tower is complete with a 2” dia. x 1/8”
wall x 4’-9” long mast, fixed base
and brake winch.
Lower section must be guyed or building bracketed
at a minimum of six feet.
10M CRANK-UP
ALUMINUM TOWERS:
Model T-135 and T-35H
35 ft. aluminum telescoping towers. The 35-foot
telescoping towers nest to approximately 12
ft. These towers feature a tilt base and one
person can “walk-down” a light duty
tower. Crank-up towers can be telescoped to
desired height. Telescoping towers ideal for
wind speed and direction. The towers are manufactured
from 6063 T82 and 6061 T6 aluminum and are complete
with a tilt-base, building bracket and mast.
See TELESCOPING
TOWERS for details
MOBILE,
PORTABLE ENVIRONMENTAL TOWERS:
Trailer tower units and
vehicle-mounted units are ideal for mobile operations.
The transportable tower units are designed for
rapid setup and easy operation in the field.
TRAILER TOWERS
WITH ALUMINUM TELESCOPING TOWERS:
Telescoping 10M towers
also combined with Trailers to provide portable
units. TM 12/T-BD-135 and TM 12/T-BD-35H are
Single axle galvanized trailers with 35’
aluminum crank-up towers.
See TRAILER
TOWERS
VEHICLE
MOUNTED TOWERS:
Vehicle-mounted aluminum
telescoping towers designed for mounting on
a customer’s vehicle.
BD-110M
and BD-10MHD are 10M crank-up towers complete
with track and carriage.
See VEHICLE
MOUNTED ALUMINUM TELESCOPING TOWERS
METEOROLOGICAL ALUMINUM
TOWERS:
Aluma Tower offers the least expensive method
of elevating wind-speed and direction equipment.
M-10M 10-meter freestanding meteorological tower designed
for small, lightweight antennas. Aluminum MET
tower is ideal for wind speed and direction
equipment and light antennas. Tilt-base designed
to be cemented directly into customer’s
concrete pad. For temporary guyed installation,
tower offered with a hinged base with a temporary
mounting plate, guy wire ears and a guy kit.
See METEOROLOGICAL
TOWERS
CAUTION:
Take care to avoid any contact with overhead
power-lines when raising, installing, or lowering
your tower. Click here for full WARNING.
back
to top |
